GS Series Class D Subwoofer Amplifier
Model Features: 1100W max power, 330W x 1 RMS at 4 ohms, 600W x 1 max power at 4 ohms, 600W x 1 RMS at 2 ohms, dynamic distortion suppression, active thermal control, High Level Input with sensing power on, subsonic filter
Pump up the volume with a Sony GS-100 Class D subwoofer amplifier that affords incredible installation flexibility thanks to its compact size while still packing quite a punch. Enjoy tremendous value with a modern aesthetic, plus variable cross-overs, variable bass boost, and single-side electrical connections to suit almost any application. Active thermal control regulates the unit's operating temperature for stable, long-term playback at high volume levels while the dynamic distortion suppressor reduces distortion that occurs at higher playback levels for clearer bass reproduction. 3 year warranty included.
The XM-GS100's efficient Class-D mono block design, compact chassis size and single sided connections provide multiple mounting options while maximizing output and control for your audio system.
The XM-GS100 has a removable top panel that conceals a variable 12 dB/oct LPF (Low-Pass filter) at 50-300Hz as well as a 12 dB/octave sub-sonic HPF (High-Pass filter), variable at 6-70Hz to maximize your systems potential. This amplifier also offers a variable 0-10 dB 40 Hz bass boost circuit to increase low frequency response.
The XM-GS100 includes a 3 year warranty.
The XM-G100 delivers 600 watts RMS power at 2 ohm with 14.4 volts, at 50 Hz with less than 1% THD+N. This unit has a mximum output power of 1100 watts mono at 2 ohm.
The Active Thermal Control regulates the units operating temperature for stable, long-term playback at high volume levels. Dynamic Distortion Suppressor reduces distortion that occurs at higher playback levels for clear bass reproduction.
The XM-GS100 delivers 330 watts RMS power at 4 ohm with 14.4 volts, from 20 Hz - 200 Hz with less than 1% THD+N. This unit has a maximum output power of 600 mono at 4 ohm.
As well as traditional RCA inputs, the XM-GS100 offers direct connections (High Level Input) to the speaker output of your car audio unit if it is not equipped with RCA line outputs. The auto sensing, high level input feature also allows the amplifier to be powered up without the need for remote power turn on connections.
-
Level Control :
High Level Input: 6.5 - 16V
-
Current Drain :
At rated output: 45 Amp (at 4 Ohms)
-
Input Voltage :
10.5-16V Power Supply Voltage
-
Internal Power Supply :
Class D TechnologyPulse Power Supply
-
Output Power :
Maximum Output: 600W (at 4 Ohms); 1100Wx1 (at 2 Ohms)
-
Power Requirements :
12V DC Car Battery (Negative Ground)
-
Rated Output :
330W RMS (20 Hz - 200 Hz, 1.0% THD + N, at 4 Ohms, 14.4V)1
600W RMS (100 Hz, 1.0% THD + N, at 2 Ohms, 14.4V)
-
Max power output :
1100W max power
-
Power Ad Hoc :
330W at 4 Ohm from 20Hz-200Hz with < 1% THD1
-
Speaker Impedance :
2-8 Ohm stereo
4-8 Ohms mono
-
Illumination :
Blue illumination
-
Impedance :
2-8 Ohms mono
-
Speaker Terminal Type :
Gold plated terminals
-
Band :
Low Pass Filter: 50-300Hz, -12dB/Oct
-
Circuit System :
Class D TechnologyPulse Power Supply
-
Frequency Response :
10-300kHz (+/-0dB)
-
Harmonic Distortion :
0.1% or less (50Hz)
-
Impedance :
2-8 Ohms mono
-
Input Level :
0.3-6.0V (RCA pin jacks)
6.5-16.0V (High Level input)
-
Low Boost :
0-10dB (40Hz)
-
Noise Level :
65 dBA
-
Power Supply :
Class D TechnologyPulse Power Supply
-
Signal Circuitry :
6-70Hz Variable -12 dB/Octave Subsonic filter
-
Audio In :
RCA Pin Jacks
High Level input connector
-
Audio Out :
Speaker Terminals
-
Input(s) :
RCA Pin Jacks
High Level input connector
-
Line Level Input(s) :
RCA pin jacks
-
Output(s) :
Speaker Terminals
-
RCA Audio Input(s) :
Pin Jacks: 0.3 - 6V
-
Dimensions (Approx) Depth :
8"
-
Dimensions (Approx) Height :
2 1/8"
-
Dimensions (Approx) Width :
10 3/4"
-
Dimensions (Approx.) :
10 3/4" x 2 1/8" x 8" (272 x 51 x 202 mm)
-
Weight (Approx.) :
5 lb 9 oz (2.5 kg)
