welcome to store.sony.com. we apologize but this site is not yet accessible for our visually impaired customers. in order to provide you the best possible service, please call one eight hundred two two two seven six six nine for assistance.

ZZR Series Class D Mono Amplifier

Model number: XM-ZZR3301
Rated 4 out of 5 stars
Model features: 1100W max power, 330W x 1 RMS into 4 ohms, 600W x 1 RMS into 2 ohms, variable LPF 50-300Hz, variable bass boost (40Hz 0-10dB)

ADDITIONAL IMAGES:

$199.99

Earn 200 Sony Rewards points on this purchase.

Dial in the sound with Xplōd™ ZZR Series amplifiers. The XM-ZZR3301 mono amplifier provides exceptional sound quality while driving 600 watts of power to your subs. In addition to maximum output power of 1100W per channel at 2 ohms, this amp features variable crossovers, single-side electrical connections, variable LPF and variable bass boost.

330W RMS (20Hz-200Hz 1.0% THD+N, at 4 Ohms, 14.4V)1

This unit has a maximum output power of 1100W per channel at 2 Ohm.

Subsonic Filter

Built in variable 12 dB/Oct LPF (Low Pass Filter) from 50-300Hz enables users to concentrate the power on lower frequencies.

600W RMS (50Hz 1.0% THD+N, at 2 Ohms, 14.4V)

Variable 6-70Hz sub-sonic HPF (High Pass Filter) 12dB/Oct.

This unit has a maximum output power of 600W per channel at 4 Ohm.

High Level Input with Sensing Power On

Direct connection (High Level Input)can be made with the speaker output of your car audio unit if it is not equipped with RCA line output.High Level Sensing power on feature allows the unit to be activated without the need for remote connection.

Bass Boost

Variable 0-10 dB 40Hz bass boost provides additional bass response at lower frequencies (rear channels only).

Product Specifications

Audio Features

  • Level Control : High Level Input: 6.5 - 16V

Speaker

  • Impedance : 2-8 Ohms mono
  • Speaker Terminal Type : Gold plated terminals

Amplifier Section

  • Max power output : 1100W max power
  • Power Ad Hoc : 330W at 4 Ohm from 20Hz-200Hz with < 1% THD1
  • Speaker Impedance : 2-8 Ohm stereo4-8 Ohms mono

Inputs and Outputs

  • Audio In : RCA Pin Jacks, High Level input connector
  • Audio Out : Speaker Terminals
  • Input(s) : RCA Pin Jacks and High Level Speaker Input Connector
  • Line Level Input(s) : RCA pin jacks
  • Output(s) : Speaker Terminals
  • RCA Audio Input(s) : Pin Jacks: 0.3 - 6V

Weights and Measurements

  • Dimensions (Approx) Depth : 11"
  • Dimensions (Approx) Height : 2-1/4"
  • Dimensions (Approx) Width : 14-1/8"
  • Dimensions (Approx.) : 14 1/8 x 2 1/4 x 11"(357 x 55 x 277 mm)
  • Weight (Approx.) : Approx. 2.9kg (6lb 7oz) not included

Audio

  • Band : Low Pass Filter: 50-300Hz, -12dB/Oct
  • Circuit System : Class D TechnologyPulse Power Supply
  • Frequency Response : 10-300kHz (+/-0dB)
  • Harmonic Distortion : 0.1% or less (50Hz)
  • Impedance : 2-8 Ohms mono
  • Input Level : 0.3-6.0V (RCA pin jacks)6.5-16.0V (High Level input)
  • Low Boost : 0-10dB (40Hz)
  • Noise Level : 65 dBA
  • Power Supply : Class D TechnologyPulse Power Supply
  • Signal Circuitry : 6-70Hz Variable -12 dB/Octave Subsonic filter

Power

  • Current Drain : At rated output: 60A (at 2 Ohms) Remote Input: 1 mA
  • Input Voltage : 10.5-16V Power Supply Voltage
  • Internal Power Supply : Class D TechnologyPulse Power Supply
  • Output Power : Maximum Output: 600W (at 4 Ohms); 1100Wx1 (at 2 Ohms)
  • Power Requirements : 12V DC Car Battery (Negative Ground)
  • Rated Output : 330W RMS (20 Hz - 200 Hz, 1.0% THD + N, at 4 Ohms, 14.4V)1 600W RMS (100 Hz, 1.0% THD + N, at 2 Ohms, 14.4V)

In the Box

  • Protection Cap
  • Mounting Screws (4)
  • High Level Input Cord

Product Profile

Support

Product Warranty

  • Installation Card - Car Amplifier

    Installation Card - Car Amplifier

    $119.99

XM-ZZR3301 4 5 2 2
SWEEEEET! This is a very good amp. I have it wired up to a Sony HU and two 12 Inch Sony subs. Plus a capacitor and a Walkman supplying audio. It has tons of power and easily powers two subs no problem. It sounds great and has plenty of thump and bass. It is a great addition to any car audio system you have going on. Great buy like most of Sony's things. March 9, 2012
Powerful Amp September 19, 2010
1-2 of 2

VIEW FOOTNOTES


1. CEA-2006 Compliant — Standardized “Voluntary” Testing & Measurement Methods for Mobile Audio Amplifiers. This standard advocates a uniform method for determining an amplifier’s RMS power and signal-to-noise ratio. Using 14.4 volts, RMS watts are measured into a 4-ohm impedance load at 1 percent Total Harmonic Distortion (THD) plus noise, at a frequency range (for general purpose amplifiers) of 20 Hz to 20,000 Hz.

© 2009 Sony Electronics Inc. All rights reserved. Reproduction in whole or in part without written permission is prohibited. Sony, Memory Stick, nav-u, Quick-BrowZer, Walkman, Xplod, ZAPPIN, and the Sony, nav-u and Xplod logos are trademarks of Sony. iPhone and iPod are trademarks of Apple Inc., registered in the U.S. and other countries. Bluetooth is a trademark of Bluetooth SIG, Inc. NAVTEQ Maps & Traffic is a trademark of NAVTEQ. All other trademarks are trademarks of their respective owners. Features and specifications are subject to change without notice. Non-metric weights and measures are approximate.

Sorry, the (model number) is no longer available.

Interested in something new?

Explore the latest models now.

Shop Now