REFURBISHED - ZR Series 2/1 Channel Amplifier
Model features: 800W max power, 125W x 2 RMS into 4 ohms, 170W x 2 RMS into 2 ohms, 340W x 1 RMS into 4 ohms, selectable 80Hz HPF/LPF
Rock your road trip with Xplōd® ZR Series amplifiers. The XM-ZR1252 puts out 125 watts RMS per channel to a pair of speakers or can be used as a bridging amplifier with a maximum output of 800W at 4 ohms. Additional features include variable crossovers, multiple channel configurations and single-side electrical connections.
Direct connection (High Level Input) can be made with the speaker output of your car audio unit if it is not equipped with RCA line output.
Hi-Level Sensing power On feature allows the unit to be activated without need for remote connection.
This unit can be used as a bridging amplifier with a maximum output of 800W at 4 Ohms.
Variable 0-10 dB 40Hz bass boost provides additional bass response at lower frequencies.
Built in selectable 12 dB/Oct 80Hz HPF and LPF.
-
Level Control :
High Level Input: 1.2 - 12V
-
Speaker Terminal Type :
Output
-
Power Ad Hoc :
125W per channel at 4 Ohms from 20Hz-20kHz with < 1% THD1
-
Audio In :
RCA Pin Jacks, High Level Input Connector
-
Audio Out :
Speaker Terminals
-
RCA Audio Input(s) :
Pin Jacks: 0.3 - 6V
-
Dimensions (Approx) Depth :
10 1/8"
-
Dimensions (Approx) Height :
2-1/4"
-
Dimensions (Approx) Width :
15 5/8"
-
Dimensions (Approx.) :
15 5/8 x 2 1/4 x 10 1/8"
(396 x 55 x 256 mm)
-
Weight (Approx.) :
6 lbs. 10 oz.
-
Frequency Response :
5 - 50 kHz (+0/-3 dB)
-
Harmonic Distortion :
0.01% (at 1kHz)
-
Impedance :
2-8 Ohms Stereo or 4-8 Ohms Mono
-
Input Level :
0.3 - 6.0V (RCA input)
1.2 - 12.0V (High Level Input)
-
Low Boost :
0-10dB (40Hz)
-
Power Supply :
OTL Output Transformerless Circuit
Pulse Power Supply
-
Current Drain :
At rated output:30A (at 4 Ohms)
Remote Input: 1 mA
-
Input Voltage :
10.5-16V Power Supply Voltage
-
Internal Power Supply :
OTL Output Transformerless Circuit
Pulse Power Supply
-
Output Power :
Maximum Output: 280W x 2 (at 4 Ohm)
800W x 1 (at 4 Ohms)
-
Power Requirements :
12V DC Car Battery (Negative Ground)
-
Rated Output :
125W x 2 (20Hz-20kHz, 1% THD+N, 4 Ohms, 14.4V)1
170W x 2 (20Hz-20kHz, 1% THD+N, 2 Ohms, 14.4V)
340W x 1 RMS (20Hz-20kHZ 1.0% THD+N, at 4 Ohms)
-
High Level Input Cord (1)
