Marine 4/3 Channel Amplifier
Model features: 600W max power, 60W x 4 RMS into 4 ohms, 70W x 4 RMS into 2 ohms, 160W x 1 RMS into 4 ohms (rear), selectable 80Hz HPF/LPF
Building a competent marine entertainment system has never been easier, especially with the XM-604M Xplōd™ 4/3 channel marine amplifier at the core. Designed to resist the rigors of salt water and sunshine, this amp features multiple channel configurations and single-side electrical connections to suit almost any application.
60W x 4 RMS (20Hz-20kHz, < 1% THD+N, 4 Ohms, 14.4V)1
This unit has a maximum output power of 150W per channel at 2 Ohm.
Built in selectable 12 dB/Oct 80 Hz HPF for front and 80 Hz LPF for rear
70W x 4 RMS (20Hz-20kHz, < 1% THD+N, 2 Ohms, 14.4V)
Direct connection (High-level Input) can be made with the speaker output of your car receiver if the unit is not equipped with RCA line output. High Level Sensing power on feature allows the unit to be activated without the need for remote turn on connections.
This unit has a maximum output power of 110W per channel at 4 Ohm.
Conformal Circuit Board Coating, UV-resistant paint, Anti-rust paint on front panel and bottom plate, Gold-plated Screws, Terminals, and Connections.
-
Level Control :
High Level Input: 6.0 - 12V
-
Impedance :
2-8 Ohms in Stereo Mode
-
Speaker Terminal Type :
Output
-
Max power output :
600W max power
-
Power Ad Hoc :
60W per channel at 4 Ohms from 20Hz-20kHz with < 1% THD
-
Speaker Impedance :
2-8 Ohm stereo
4-8 Ohms mono
-
Audio In :
RCA Pin Jacks, High Level Input Connector
-
Audio Out :
Speaker Terminals
-
Input(s) :
RCA Pin Jacks and High Level Speaker Input Connector
-
Line Level Input(s) :
RCA pin jacks
-
Output(s) :
Speaker Terminals
-
RCA Audio Input(s) :
Pin Jacks: 0.3 - 6V
-
Dimensions (Approx) Depth :
10 1/2"
-
Dimensions (Approx) Height :
2 1/4"
-
Dimensions (Approx) Width :
15 7/8"
-
Dimensions (Approx.) :
15 7/8 x 2 1/4 x 10 1/2"
(401 x 55 x 264mm)
-
Weight (Approx.) :
7lbs 1oz (3.2Kg)
-
Band :
Low Pass Filter: 80 HZ, -12dB/oct
High Pass Filter: 80 HZ, -12dB/oct
-
Circuit System :
OTL Output Transformerless Circuit
Pulse Power Supply
-
Frequency Response :
5 Hz - 50 Khz (+0/-3 db)
-
Harmonic Distortion :
0.005% (1 kHz)
-
Impedance :
2-8 Ohms Stereo,
4-8 Ohms Mono
-
Input Level :
0.3 - 6.0V (RCA input)
2.8 - 12.0V (High Level Input)
-
Noise Level :
97 dBA
-
Power Supply :
OTL Output Transformerless Circuit
Pulse Power Supply
-
Current Drain :
At rated output: 33 A (4 Ohm, 60W x 4) Remote Input 1 mA
-
Input Voltage :
10.5-16V Power Supply Voltage
-
Internal Power Supply :
OTL (Output Transformerless Circuit) Pulse Power Supply
-
Output Power :
Maximum Output: 110 W x 4 (at 4 Ohms)
Three Speakers: 150 W x 2 (at 2 Ohms) + 300 W x 1 (BTL at 4 Ohms)
-
Power Requirements :
12 V DC marine battery (negative ground)
-
Rated Output :
60 W x 4 (20 Hz - 20 kHz, 1% THD, at 4 Ohms, 14.4V),
70 W x 4 (20 Hz - 20 kHz, 1% THD, at 2 Ohms, 14.4V)
-
High Level input cord (1)
